Skip to main content Link Search Menu Expand Document Warning Info Success Info (external link) Copy Copied Following system colour scheme Selected dark colour scheme Selected light colour scheme Telegram GitHub Edit

Hardware Specifications

   
Vendor/Brand Huawei
Model HG8010H
ODM
Chipset HiSilicon SD5116
Flash 128MiB (SLC NAND DS35Q1GA-IB)
RAM 256MiB
CPU Hisilicon A9 dual core (ARMv7)
System Dopra Linux
2.5GBaseT No
Optics SC/APC and SC/UPC
IP address 192.168.100.1
Web Gui ✅ user root, password admin or adminHW and user telecomadmin, password admintelecom
SSH  
Telnet After Enabling user root, password admin or adminHW
Serial  
Form Factor ONT
HG8010H
HG8010H: Horizontal PON port (left, middle); vertical PON port (right)
HG8010Hv3/4/5
Bottom of the HG8010Hv3/4/5
HG8010Hv6
Bottom of the HG8010Hv6

Hardware revisions

  • v1: Horizontal PON port
  • v2: Horizontal PON port
  • v3: Vertical PON port
  • v4: Vertical PON port
  • v5: Vertical PON port
  • v6: Vertical PON port

List of software versions

  • HWTCA31610003
  • V3R013C10S112
  • V3R015C10S106
  • V3R016C10S003 (V300R016C10SPC003B010)
  • V3R017C00S100
  • V3R017C10S201 (V300R017C10SPC201B255)
  • V5R020C10S020 (V500R020C10SPC020B014 - V500R020C10SPC020A2011020049)
  • V5R020C10S024 (V500R020C10SPC024B001)
  • V5R020C10S025 (V500R020C10SPC025B002)
  • V5R020C10S115 (V500R020C10SPC115B270)

List of partitions

0x000000000000-0x000000100000 : “bootcode” (1MiB)
0x000000100000-0x000008000000 : “ubilayer_v5” (127MiB)

Enabling telnet

We need access to a specific shell and in order to get it enabling telnet is required. On the ONT, the telnet server accepts connections but doesn’t read any input, nor does it send anything.

To enable telnet the configuration backup/restore web UI page will be used. The configuration can be downloaded as an XML, which contains a lot more options than the web interface and a couple of them can be modified to enable telnet access: under the X_HW_CLITelnetAccess node, set the Access attribute to 1 and, in AclServices, TELNETLanEnable should also be set to 1. Both might have to be set but your mileage may vary.

It is possible that this won’t work/has been fixed in more recent versions.

Now that this is done, the modified configuration file can be uploaded via the web interface, the ONT will restart and telnet should be accessible on port 23.

GPON ONU status

Getting information on the OLT vendor

WAP>omcicmd mib show meid 131 instid 0

  -------------------------------------------------------
  Me(OLT-G), instance(0x0), instance size is 54
  -------------------------------------------------------
  Att1, AttSize = 0x4, AttContent: 48575443
  Att2, AttSize = 0x14, AttContent: 00000000 00000000 00000000 00000000 00000000
  Att3, AttSize = 0xe, AttContent: 31300000 00000000 00000000 0000
  Att4, AttSize = 0xe, AttContent: 00000000 00000000 00000000 0000
  -------------------------------------------------------

success!

0x48575443HWTC (Huawei)

GPON/OMCI settings

Getting OMCI software version (ME 7)

WAP>omcicmd mib show meid 7 instid 0

  -------------------------------------------------------
  Me(Software Image), instance(0x0), instance size is 19
  -------------------------------------------------------
  Att1, AttSize = 0xe, AttContent: 56355230 32304331 30533131 3500
  Att2, AttSize = 0x1, AttContent: 00
  Att3, AttSize = 0x1, AttContent: 00
  Att4, AttSize = 0x1, AttContent: 01
  -------------------------------------------------------

success!
WAP>omcicmd mib show meid 7 instid 1

  -------------------------------------------------------
  Me(Software Image), instance(0x1), instance size is 19
  -------------------------------------------------------
  Att1, AttSize = 0xe, AttContent: 56355230 32304331 30533131 3500
  Att2, AttSize = 0x1, AttContent: 01
  Att3, AttSize = 0x1, AttContent: 01
  Att4, AttSize = 0x1, AttContent: 01
  -------------------------------------------------------

success!

0x56355230 32304331 30533131 3500V5R020C10S115

Getting OMCI hardware version and vendor ID (ME 256)

WAP>omcicmd mib show meid 256 instid 0

  -------------------------------------------------------
  Me(ONT-G), instance(0x0), instance size is 73
  -------------------------------------------------------
  Att1, AttSize = 0x4, AttContent: 48575443
  Att2, AttSize = 0xe, AttContent: 32343046 2e410000 00000000 0000
  Att3, AttSize = 0x8, AttContent: 2a2a2a2a 2a2a2a2a
  Att4, AttSize = 0x1, AttContent: 00
  Att5, AttSize = 0x1, AttContent: 00
  Att6, AttSize = 0x1, AttContent: 00
  Att7, AttSize = 0x1, AttContent: 00
  Att8, AttSize = 0x1, AttContent: 00
  Att9, AttSize = 0x1, AttContent: 00
  Att10, AttSize = 0x18, AttContent: 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a
  Att11, AttSize = 0xc, AttContent: 2a2a2a2a 2a2a2a2a 2a2a2a2a
  Att12, AttSize = 0x1, AttContent: 00
  Att13, AttSize = 0x2, AttContent: 0001
  -------------------------------------------------------

success!

0x48575443HWTC 0x32343046 2e41240F.A

Getting OMCI equipment ID (ME 257)

WAP>omcicmd mib show meid 257 instid 0

  -------------------------------------------------------
  Me(ONT2-G), instance(0x0), instance size is 44
  -------------------------------------------------------
  Att1, AttSize = 0x14, AttContent: 48473830 31304876 36000000 00000000 00000000
  Att2, AttSize = 0x1, AttContent: b0
  Att3, AttSize = 0x2, AttContent: 0240
  Att4, AttSize = 0x1, AttContent: 01
  Att5, AttSize = 0x1, AttContent: 01
  Att6, AttSize = 0x2, AttContent: 0040
  Att7, AttSize = 0x1, AttContent: 02
  Att8, AttSize = 0x1, AttContent: 01
  Att9, AttSize = 0x2, AttContent: 0020
  Att10, AttSize = 0x4, AttContent: 00000000
  Att11, AttSize = 0x2, AttContent: 007d
  Att12, AttSize = 0x1, AttContent: 00
  Att13, AttSize = 0x2, AttContent: 0018
  Att14, AttSize = 0x2, AttContent: 0001
  -------------------------------------------------------

success!

0x48473830 31304876 36HG8010Hv6

Miscellaneous Links

Teardown and other photos

v1-2

HG8010Hv1/2 Teardown
HG8010Hv1/2: Teardown
HG8010Hv1/2 Teardown
HG8010Hv1/2: Teardown

v6

HG8010Hv6 Teardown
HG8010Hv6: Teardown
HG8010Hv6 Teardown
HG8010Hv6: Teardown